This is the complete Hyundai Aura wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Hyundai Aura wiper blade size – quick answer
- Hyundai Aura (2020–present): 24" + 16" (600 mm + 400 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Hyundai Aura wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Gen 1 | 2020–2023 | 24" (600 mm) | 16" (400 mm) | Shop |
| Gen 1 facelift | 2023–present | 24" (600 mm) | 16" (400 mm) | Shop |
Find your model year
- 24" + 16" – Aura: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Aura: E, S, SX, SX(O), CNG
Which wiper blade type is best?
- Conventional (from ₹399 a set) – metal frame, dependable everyday wiping. Best value for city use.
- Hybrid (₹599) – frame inside an aerodynamic cover; firmer contact and a sleeker look.
- Frameless (₹699) – single curved beam for even pressure and quiet wiping at highway speed. Our pick for heavy monsoon rain.
- Carbon Aero (₹1,200) – premium frameless blade with a carbon-finish aero spoiler for the best high-speed performance.
Whichever type you choose, buy the exact size: a blade that is too long can hit the windscreen frame, and one that is too short leaves an unwiped band in your line of sight.
How to replace Aura wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Aura wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Hyundai Aura?
Aura (2020–present): 24" + 16" (600 mm + 400 mm).
Is the wiper size the same for every Aura variant?
Yes. Within a generation, E, S, SX, SX(O), CNG and all other variants use the same 24" + 16" blades.
Do these fit the Aura wiper arm?
Yes – the Aura uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.