This is the complete Honda CR-V wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Honda CR-V wiper blade size – quick answer
- Honda CR-V (2003–2012): 21" + 19" (530 mm + 480 mm)
- Honda CR-V (2013–2020): 26" + 16" (650 mm + 400 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Honda CR-V wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| CR-V Gen 2 | 2003–2007 | 21" (530 mm) | 19" (480 mm) | Shop |
| CR-V Gen 3 | 2007–2012 | 21" (530 mm) | 19" (480 mm) | Shop |
| CR-V Gen 4 | 2013–2018 | 26" (650 mm) | 16" (400 mm) | Shop |
| CR-V Gen 5 | 2018–2020 | 26" (650 mm) | 16" (400 mm) | Shop |
Find your model year
- 21" + 19" – CR-V (2003–2012): 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
- 26" + 16" – CR-V: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- CR-V (2003–2012): 2.0, 2.4, AT
- CR-V: 2WD, 4WD
How to replace CR-V wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy CR-V wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Honda CR-V?
CR-V (2003–2012): 21" + 19" (530 mm + 480 mm). CR-V (2013–2020): 26" + 16" (650 mm + 400 mm).
Is the wiper size the same for every CR-V variant?
Yes. Within a generation, 2WD, 4WD and all other variants use the same 26" + 16" blades.
Do these fit the CR-V wiper arm?
Yes – the CR-V uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.