This is the complete Hyundai Creta wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Hyundai Creta wiper blade size – quick answer
- Hyundai Creta (2015–present): 26" + 16" (650 mm + 400 mm)
- Hyundai Creta N Line (2024–present): 26" + 16" (650 mm + 400 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Hyundai Creta wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Gen 1 | 2015–2018 | 26" (650 mm) | 16" (400 mm) | Shop |
| Gen 1 facelift | 2018–2020 | 26" (650 mm) | 16" (400 mm) | Shop |
| Gen 2 | 2020–2024 | 26" (650 mm) | 16" (400 mm) | Shop |
| Gen 2 facelift | Jan 2024–present | 26" (650 mm) | 16" (400 mm) | Shop |
| Creta Electric | Jan 2025–present | 26" (650 mm) | 16" (400 mm) | Shop |
| Creta N Line | 2024–present | 26" (650 mm) | 16" (400 mm) | Shop |
Find your model year
- 26" + 16" – Creta: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
- 26" + 16" – Creta N Line: 2024, 2025, 2026
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Creta: E, EX, S, S(O), SX, SX(O), Knight, Creta Electric
- Creta N Line: N8, N10
How to replace Creta wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Creta wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Hyundai Creta?
Creta (2015–present): 26" + 16" (650 mm + 400 mm). Creta N Line (2024–present): 26" + 16" (650 mm + 400 mm).
Is the wiper size the same for every Creta variant?
Yes. Within a generation, N8, N10 and all other variants use the same 26" + 16" blades.
Do these fit the Creta wiper arm?
Yes – the Creta uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.