This is the complete Hyundai Eon wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Hyundai Eon wiper blade size – quick answer
- Hyundai Eon (2011–2019): 22" + 14" (550 mm + 350 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Hyundai Eon wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Eon | 2011–2019 | 22" (550 mm) | 14" (350 mm) | Shop |
Find your model year
- 22" + 14" – Eon: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Eon: D-Lite, Era, Magna, Sportz
How to replace Eon wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Eon wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Hyundai Eon?
Eon (2011–2019): 22" + 14" (550 mm + 350 mm).
Is the wiper size the same for every Eon variant?
Yes. Within a generation, D-Lite, Era, Magna, Sportz and all other variants use the same 22" + 14" blades.
Do these fit the Eon wiper arm?
Yes – the Eon uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.