This is the complete Hyundai Tucson wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Hyundai Tucson wiper blade size – quick answer
- Hyundai Tucson (2005–2010): 24" + 16" (600 mm + 400 mm)
- Hyundai Tucson (2016–2022): 26" + 16" (650 mm + 400 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Hyundai Tucson wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Tucson Gen 1 (JM) | 2005–2010 | 24" (600 mm) | 16" (400 mm) | Shop |
| Tucson Gen 3 (TL) | 2016–2020 | 26" (650 mm) | 16" (400 mm) | Shop |
| Tucson Gen 3 facelift | 2020–2022 | 26" (650 mm) | 16" (400 mm) | Shop |
Find your model year
- 24" + 16" – Tucson: 2005, 2006, 2007, 2008, 2009, 2010
- 26" + 16" – Tucson: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Tucson: GL, GLS, 4WD
How to replace Tucson wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Tucson wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Hyundai Tucson?
Tucson (2005–2010): 24" + 16" (600 mm + 400 mm). Tucson (2016–2022): 26" + 16" (650 mm + 400 mm).
Is the wiper size the same for every Tucson variant?
Yes. Within a generation, GL, GLS, 4WD and all other variants use the same 26" + 16" blades.
Do these fit the Tucson wiper arm?
Yes – the Tucson uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.