This is the complete Hyundai Venue wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Hyundai Venue wiper blade size – quick answer
- Hyundai Venue (2019–present): 24" + 18" (600 mm + 450 mm)
- Hyundai Venue N Line (2022–present): 24" + 18" (600 mm + 450 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Hyundai Venue wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Gen 1 | 2019–2022 | 24" (600 mm) | 18" (450 mm) | Shop |
| Gen 1 facelift | 2022–2025 | 24" (600 mm) | 18" (450 mm) | Shop |
| Gen 2 | Nov 2025–present | 24" (600 mm) | 18" (450 mm) | Shop |
| Gen 1 | 2022–2025 | 24" (600 mm) | 18" (450 mm) | Shop |
| Gen 2 | Nov 2025–present | 24" (600 mm) | 18" (450 mm) | Shop |
Find your model year
- 24" + 18" – Venue: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
- 24" + 18" – Venue N Line: 2022, 2023, 2024, 2025, 2026
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Venue: E, S, S(O), SX, SX(O), Knight
- Venue N Line: N6, N8
How to replace Venue wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Venue wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Hyundai Venue?
Venue (2019–present): 24" + 18" (600 mm + 450 mm). Venue N Line (2022–present): 24" + 18" (600 mm + 450 mm).
Is the wiper size the same for every Venue variant?
Yes. Within a generation, N6, N8 and all other variants use the same 24" + 18" blades.
Do these fit the Venue wiper arm?
Yes – the Venue uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.