This is the complete Hyundai Xcent wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Hyundai Xcent wiper blade size – quick answer
- Hyundai Xcent (2014–2020): 22" + 16" (550 mm + 400 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Hyundai Xcent wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Xcent | 2014–2017 | 22" (550 mm) | 16" (400 mm) | Shop |
| Xcent facelift | 2017–2020 | 22" (550 mm) | 16" (400 mm) | Shop |
Find your model year
- 22" + 16" – Xcent: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Xcent: E, S, SX, SX(O), Prime
How to replace Xcent wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Xcent wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Hyundai Xcent?
Xcent (2014–2020): 22" + 16" (550 mm + 400 mm).
Is the wiper size the same for every Xcent variant?
Yes. Within a generation, E, S, SX, SX(O), Prime and all other variants use the same 22" + 16" blades.
Do these fit the Xcent wiper arm?
Yes – the Xcent uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.