Isuzu D-Max Single Cab Wiper Blade Size (2014–2026): 22" + 19"

Isuzu D-Max Single Cab wiper blades

This is the complete Isuzu D-Max Single Cab wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Isuzu D-Max Single Cab wiper blade size – quick answer

  • Isuzu D-Max Single Cab (2014–present): 22" + 19" (550 mm + 480 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Isuzu D-Max Single Cab wiper blade size by generation

Generation Years Driver side Passenger side
D-Max Single Cab 2014–present 22" (550 mm) 19" (480 mm) Shop

Find your model year

  • 22" + 19" – D-Max Single Cab: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • D-Max Single Cab: Flat Deck, Cab Chassis

How to replace D-Max Single Cab wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy D-Max Single Cab wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Isuzu D-Max Single Cab?

D-Max Single Cab (2014–present): 22" + 19" (550 mm + 480 mm).

Is the wiper size the same for every D-Max Single Cab variant?

Yes. Within a generation, Flat Deck, Cab Chassis and all other variants use the same 22" + 19" blades.

Do these fit the D-Max Single Cab wiper arm?

Yes – the D-Max Single Cab uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.