Jeep Wrangler Wiper Blade Size (2016–2026): 16" + 16"

Jeep Wrangler wiper blades

This is the complete Jeep Wrangler wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Jeep Wrangler wiper blade size – quick answer

  • Jeep Wrangler Unlimited (JK) (2016–2019): 16" + 16" (400 mm + 400 mm)
  • Jeep Wrangler (JL) (2019–present): 16" + 16" (400 mm + 400 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Jeep Wrangler wiper blade size by generation

Generation Years Driver side Passenger side
Wrangler Unlimited (JK) 2016–2019 16" (400 mm) 16" (400 mm) Shop
Wrangler (JL) 2019–present 16" (400 mm) 16" (400 mm) Shop

Find your model year

  • 16" + 16" – Wrangler Unlimited (JK): 2016, 2017, 2018, 2019
  • 16" + 16" – Wrangler (JL): 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • Wrangler (JL): Unlimited, Rubicon

How to replace Wrangler wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Wrangler wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Jeep Wrangler?

Wrangler Unlimited (JK) (2016–2019): 16" + 16" (400 mm + 400 mm). Wrangler (JL) (2019–present): 16" + 16" (400 mm + 400 mm).

Is the wiper size the same for every Wrangler variant?

Yes. Within a generation, Unlimited, Rubicon and all other variants use the same 16" + 16" blades.

Do these fit the Wrangler wiper arm?

Yes – the Wrangler uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.