Maruti Suzuki Celerio Wiper Blade Size (2014–2026): 21" + 14"

Maruti Suzuki Celerio wiper blades

This is the complete Maruti Suzuki Celerio wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Maruti Suzuki Celerio wiper blade size – quick answer

  • Maruti Suzuki Celerio (2014–present): 21" + 14" (530 mm + 350 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Maruti Suzuki Celerio wiper blade size by generation

Generation Years Driver side Passenger side
Celerio / Celerio X Gen 1 2014–2021 21" (530 mm) 14" (350 mm) Shop
Celerio Gen 2 Nov 2021–present 21" (530 mm) 14" (350 mm) Shop

Find your model year

  • 21" + 14" – Celerio: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • Celerio: LXi, VXi, ZXi, ZXi+, Celerio X, AGS (AMT), CNG

How to replace Celerio wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Celerio wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Maruti Suzuki Celerio?

Celerio (2014–present): 21" + 14" (530 mm + 350 mm).

Is the wiper size the same for every Celerio variant?

Yes. Within a generation, LXi, VXi, ZXi, ZXi+, Celerio X and all other variants use the same 21" + 14" blades.

Do these fit the Celerio wiper arm?

Yes – the Celerio uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.