This is the complete Maruti Suzuki Eeco wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Maruti Suzuki Eeco wiper blade size – quick answer
- Maruti Suzuki Eeco (2001–present): 16" + 16" (400 mm + 400 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Maruti Suzuki Eeco wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Versa | 2001–2010 | 16" (400 mm) | 16" (400 mm) | Shop |
| Eeco | 2010–2022 | 16" (400 mm) | 16" (400 mm) | Shop |
| Eeco facelift | 2022–present | 16" (400 mm) | 16" (400 mm) | Shop |
Find your model year
- 16" + 16" – Eeco: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Eeco: 5-seater, 7-seater, Cargo, Tour, CNG
How to replace Eeco wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Eeco wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Maruti Suzuki Eeco?
Eeco (2001–present): 16" + 16" (400 mm + 400 mm).
Is the wiper size the same for every Eeco variant?
Yes. Within a generation, 5-seater, 7-seater, Cargo, Tour, CNG and all other variants use the same 16" + 16" blades.
Do these fit the Eeco wiper arm?
Yes – the Eeco uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.