This is the complete Maruti Suzuki Fronx wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Maruti Suzuki Fronx wiper blade size – quick answer
- Maruti Suzuki Fronx (2023–present): 21" + 18" (530 mm + 450 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Maruti Suzuki Fronx wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Gen 1 | 2023–present | 21" (530 mm) | 18" (450 mm) | Shop |
Find your model year
- 21" + 18" – Fronx: 2023, 2024, 2025, 2026
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Fronx: Sigma, Delta, Delta+, Zeta, Alpha, Turbo, AGS, CNG
How to replace Fronx wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Fronx wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Maruti Suzuki Fronx?
Fronx (2023–present): 21" + 18" (530 mm + 450 mm).
Is the wiper size the same for every Fronx variant?
Yes. Within a generation, Sigma, Delta, Delta+, Zeta, Alpha and all other variants use the same 21" + 18" blades.
Do these fit the Fronx wiper arm?
Yes – the Fronx uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.