Maruti Suzuki Omni Wiper Blade Size (1984–2019): 12" + 12"

Maruti Suzuki Omni wiper blades

This is the complete Maruti Suzuki Omni wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Maruti Suzuki Omni wiper blade size – quick answer

  • Maruti Suzuki Omni (1984–2019): 12" + 12" (300 mm + 300 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Maruti Suzuki Omni wiper blade size by generation

Generation Years Driver side Passenger side
Omni 1984–2019 12" (300 mm) 12" (300 mm) Shop

Find your model year

  • 12" + 12" – Omni: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • Omni: 5-seater, 8-seater, Cargo, LPG

How to replace Omni wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Omni wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Maruti Suzuki Omni?

Omni (1984–2019): 12" + 12" (300 mm + 300 mm).

Is the wiper size the same for every Omni variant?

Yes. Within a generation, 5-seater, 8-seater, Cargo, LPG and all other variants use the same 12" + 12" blades.

Do these fit the Omni wiper arm?

Yes – the Omni uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.