Maruti Suzuki SX4 Wiper Blade Size (2007–2014): 24" + 14"

Maruti Suzuki SX4 wiper blades

This is the complete Maruti Suzuki SX4 wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Maruti Suzuki SX4 wiper blade size – quick answer

  • Maruti Suzuki SX4 (2007–2014): 24" + 14" (600 mm + 350 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Maruti Suzuki SX4 wiper blade size by generation

Generation Years Driver side Passenger side
SX4 2007–2014 24" (600 mm) 14" (350 mm) Shop

Find your model year

  • 24" + 14" – SX4: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • SX4: VXi, ZXi, VDi, ZDi, Green CNG

How to replace SX4 wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy SX4 wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Maruti Suzuki SX4?

SX4 (2007–2014): 24" + 14" (600 mm + 350 mm).

Is the wiper size the same for every SX4 variant?

Yes. Within a generation, VXi, ZXi, VDi, ZDi, Green CNG and all other variants use the same 24" + 14" blades.

Do these fit the SX4 wiper arm?

Yes – the SX4 uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.