Maruti Suzuki Zen Estilo Wiper Blade Size (2006–2014): 21" + 18"

Maruti Suzuki Zen Estilo wiper blades

This is the complete Maruti Suzuki Zen Estilo wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Maruti Suzuki Zen Estilo wiper blade size – quick answer

  • Maruti Suzuki Zen Estilo (2006–2014): 21" + 18" (530 mm + 450 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Maruti Suzuki Zen Estilo wiper blade size by generation

Generation Years Driver side Passenger side
Zen Estilo / Estilo 2006–2014 21" (530 mm) 18" (450 mm) Shop

Find your model year

  • 21" + 18" – Zen Estilo: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • Zen Estilo: LX, LXi, VXi, Sports

How to replace Zen Estilo wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Zen Estilo wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Maruti Suzuki Zen Estilo?

Zen Estilo (2006–2014): 21" + 18" (530 mm + 450 mm).

Is the wiper size the same for every Zen Estilo variant?

Yes. Within a generation, LX, LXi, VXi, Sports and all other variants use the same 21" + 18" blades.

Do these fit the Zen Estilo wiper arm?

Yes – the Zen Estilo uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.