This is the complete Nissan Terrano wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Nissan Terrano wiper blade size – quick answer
- Nissan Terrano (2013–2020): 20" + 20" (500 mm + 500 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Nissan Terrano wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Terrano | 2013–2017 | 20" (500 mm) | 20" (500 mm) | Shop |
| Terrano facelift | 2017–2020 | 20" (500 mm) | 20" (500 mm) | Shop |
Find your model year
- 20" + 20" – Terrano: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Terrano: XE, XL, XV, AMT
How to replace Terrano wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Terrano wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Nissan Terrano?
Terrano (2013–2020): 20" + 20" (500 mm + 500 mm).
Is the wiper size the same for every Terrano variant?
Yes. Within a generation, XE, XL, XV, AMT and all other variants use the same 20" + 20" blades.
Do these fit the Terrano wiper arm?
Yes – the Terrano uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.