This is the complete Renault Kiger wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.
Renault Kiger wiper blade size – quick answer
- Renault Kiger (2021–2025): 20" + 16" (500 mm + 400 mm)
All sizes fit the standard U-hook (J-hook) wiper arm.
Renault Kiger wiper blade size by generation
| Generation | Years | Driver side | Passenger side | |
|---|---|---|---|---|
| Kiger | 2021–2025 | 20" (500 mm) | 16" (400 mm) | Shop |
Find your model year
- 20" + 16" – Kiger: 2021, 2022, 2023, 2024, 2025
Variants covered
Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:
- Kiger: RXE, RXL, RXT, RXZ
How to replace Kiger wiper blades
- Lift the wiper arm away from the windscreen until it locks upright.
- Press the release tab on the U-hook adapter and slide the old blade down off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Lower the arm gently and repeat on the other side with the correct length.
- Test with washer fluid – the glass should be clear in one sweep.
When to replace
Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.
Buy Kiger wiper blades
Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:
FAQs
What is the wiper blade size of the Renault Kiger?
Kiger (2021–2025): 20" + 16" (500 mm + 400 mm).
Is the wiper size the same for every Kiger variant?
Yes. Within a generation, RXE, RXL, RXT, RXZ and all other variants use the same 20" + 16" blades.
Do these fit the Kiger wiper arm?
Yes – the Kiger uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.