Tata Indica Vista Wiper Blade Size (2008–2018): 24" + 16"

Tata Indica Vista wiper blades

This is the complete Tata Indica Vista wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Tata Indica Vista wiper blade size – quick answer

  • Tata Indica Vista (2008–2018): 24" + 16" (600 mm + 400 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Tata Indica Vista wiper blade size by generation

Generation Years Driver side Passenger side
Indica Vista 2008–2012 24" (600 mm) 16" (400 mm) Shop
Indica Vista facelift 2012–2018 24" (600 mm) 16" (400 mm) Shop

Find your model year

  • 24" + 16" – Indica Vista: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • Indica Vista: Aqua, Aura, Terra, Quadrajet, Safire, LS, LX, VX, ZX

How to replace Indica Vista wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Indica Vista wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Tata Indica Vista?

Indica Vista (2008–2018): 24" + 16" (600 mm + 400 mm).

Is the wiper size the same for every Indica Vista variant?

Yes. Within a generation, Aqua, Aura, Terra, Quadrajet, Safire and all other variants use the same 24" + 16" blades.

Do these fit the Indica Vista wiper arm?

Yes – the Indica Vista uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.