Tata Nano Wiper Blade Size (2009–2018): 26" single

Tata Nano wiper blades

This is the complete Tata Nano wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Tata Nano wiper blade size – quick answer

  • Tata Nano (2009–2018): 26" (650 mm) single blade

All sizes fit the standard U-hook (J-hook) wiper arm.

Tata Nano wiper blade size by generation

Generation Years Driver side Passenger side
Nano (single wiper) 2009–2015 26" (650 mm) Single wiper Shop
Nano GenX (single wiper) 2015–2018 26" (650 mm) Single wiper Shop

Find your model year

  • 26" – Nano: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • Nano: Std, CX, LX, GenX XE, XM, XT, XTA, Twist

How to replace Nano wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Nano wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Tata Nano?

Nano (2009–2018): 26" (650 mm) single blade.

Is the wiper size the same for every Nano variant?

Yes. Within a generation, Std, CX, LX, GenX XE, XM and all other variants use the same 26" blades.

Do these fit the Nano wiper arm?

Yes – the Nano uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.