Toyota Corolla Altis Wiper Blade Size (2003–2014): 24" + 16"

This is the complete Toyota Corolla Altis wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Toyota Corolla Altis wiper blade size – quick answer

• Toyota Corolla / Corolla Altis (2003–2014): 24" + 16" (600 mm + 400 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Toyota Corolla Altis wiper blade size by generation

Find your model year

• 24" + 16" – Corolla / Corolla Altis: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

• Corolla / Corolla Altis: J, G, GL, VL

How to replace Corolla Altis wiper blades

1. Lift the wiper arm away from the windscreen until it locks upright.
2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
3. Slide the new blade onto the hook until it clicks into place.
4. Lower the arm gently and repeat on the other side with the correct length.
5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Corolla Altis wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

• Toyota Corolla / Corolla Altis wiper blades – 24" + 16"

FAQs

What is the wiper blade size of the Toyota Corolla Altis?

Corolla / Corolla Altis (2003–2014): 24" + 16" (600 mm + 400 mm).

Is the wiper size the same for every Corolla Altis variant?

Yes. Within a generation, J, G, GL, VL and all other variants use the same 24" + 16" blades.

Do these fit the Corolla Altis wiper arm?

Yes – the Corolla Altis uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.