Toyota Innova / Innova Crysta Wiper Blade Size (2005–2026): All Generations

A white sports car parked in front of a toyota dealership

Toyota Innova / Innova Crysta wiper blades

This is the complete Toyota Innova / Innova Crysta wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Toyota Innova / Innova Crysta wiper blade size – quick answer

  • Toyota Innova (2005–2016): 24" + 16" (600 mm + 400 mm)
  • Toyota Innova Crysta (2016–present): 26" + 16" (650 mm + 400 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Toyota Innova / Innova Crysta wiper blade size by generation

Generation Years Driver side Passenger side
Innova (incl. 2009 & 2012 facelifts) 2005–2016 24" (600 mm) 16" (400 mm) Shop
Innova Crysta 2016–2020 26" (650 mm) 16" (400 mm) Shop
Innova Crysta facelift 2020–present 26" (650 mm) 16" (400 mm) Shop

Find your model year

  • 24" + 16" – Innova: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
  • 26" + 16" – Innova Crysta: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

  • Innova: E, G, GX, V, VX, ZX
  • Innova Crysta: G, GX, VX, ZX

Which wiper blade type is best?

  • Conventional (from ₹399 a set) – metal frame, dependable everyday wiping. Best value for city use.
  • Hybrid (₹599) – frame inside an aerodynamic cover; firmer contact and a sleeker look.
  • Frameless (₹699) – single curved beam for even pressure and quiet wiping at highway speed. Our pick for heavy monsoon rain.
  • Carbon Aero (₹1,200) – premium frameless blade with a carbon-finish aero spoiler for the best high-speed performance.

Whichever type you choose, buy the exact size: a blade that is too long can hit the windscreen frame, and one that is too short leaves an unwiped band in your line of sight.

How to replace Innova / Innova Crysta wiper blades

  1. Lift the wiper arm away from the windscreen until it locks upright.
  2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Lower the arm gently and repeat on the other side with the correct length.
  5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Innova / Innova Crysta wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

FAQs

What is the wiper blade size of the Toyota Innova / Innova Crysta?

Innova (2005–2016): 24" + 16" (600 mm + 400 mm). Innova Crysta (2016–present): 26" + 16" (650 mm + 400 mm).

Is the wiper size the same for every Innova / Innova Crysta variant?

Yes. Within a generation, G, GX, VX, ZX and all other variants use the same 26" + 16" blades.

Do these fit the Innova / Innova Crysta wiper arm?

Yes – the Innova / Innova Crysta uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.