Volkswagen Vento Wiper Blade Size (2010–2022): 24" + 16"

This is the complete Volkswagen Vento wiper blade size guide: verified sizes for every generation and model year, the variants each size fits, and how to replace the blades yourself in a couple of minutes.

Volkswagen Vento wiper blade size – quick answer

• Volkswagen Vento (2010–2022): 24" + 16" (600 mm + 400 mm)

All sizes fit the standard U-hook (J-hook) wiper arm.

Volkswagen Vento wiper blade size by generation

Find your model year

• 24" + 16" – Vento: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

Variants covered

Wiper size depends on the windscreen, not the trim, engine or fuel – every variant of a generation takes the same blades:

• Vento: Trendline, Comfortline, Highline, Highline Plus

How to replace Vento wiper blades

1. Lift the wiper arm away from the windscreen until it locks upright.
2. Press the release tab on the U-hook adapter and slide the old blade down off the hook.
3. Slide the new blade onto the hook until it clicks into place.
4. Lower the arm gently and repeat on the other side with the correct length.
5. Test with washer fluid – the glass should be clear in one sweep.

When to replace

Every 6–12 months, or sooner if the blades streak, squeak, judder or leave unwiped patches – especially before the monsoon.

Buy Vento wiper blades

Prootto sells exact-fit sets of two in Conventional, Hybrid, Frameless and Carbon Aero:

• Volkswagen Vento wiper blades – 24" + 16"

FAQs

What is the wiper blade size of the Volkswagen Vento?

Vento (2010–2022): 24" + 16" (600 mm + 400 mm).

Is the wiper size the same for every Vento variant?

Yes. Within a generation, Trendline, Comfortline, Highline, Highline Plus and all other variants use the same 24" + 16" blades.

Do these fit the Vento wiper arm?

Yes – the Vento uses a standard U-hook (J-hook) arm, and Prootto blades come with the matching adapter.